MOS-620CH / 640CH
  MPS-3003L-3/ 3003LK-3
  MPS-3005L-3/ 3005LK-3
MPS-3002S/ 3003S/ 3005S
  MPS-6003S
MPS-3010L-1
  MPS-1820L-1
  MPS-6005L-1
MPS-3010L-2
MPS-6005L-2
MPS-3020/7061
  MPS-7162/ 7163
MPS-7033/7052/7062/7101
 
 
Genset Controller
EMS39
EMS907
EMS926
Toroidal transformer
For AV amplifier
For industrial contol
For light fittings
For medical euipments
For testingt equipment
MF0025G
 
 
MFG-8219A/8255A

3MHz/5MHz Analog Function Genrator with 100MHz Frequency Counter + AM/FM Modulation

Specification
  • Main
  • Frequency Range : 0.3Hz~3MHz/0.5Hz~5MHz(7Rang)
  • Amplitude : ≥ 20Vpp(into 50 Ω load)
  • Impedance : 50 Ω± 10 %
  • Attenuator : -20dB ± 1dB
  • DC Offset : < -5V~ > 5V(into 50 Ω load)
  • Duty Control : 80% : 20 % : :80% to 1MHz Continued variable
  • Display : 6digits LED display
  • Sine Wave
  • Distortion : ≤ 1%, 0.3Hz~200KHz THD ≤ 35d / 0.5Hz~100KHz THD≤30dB
  • Flatness : < 0.3dB, 0.3Hz~300KHz; < 0.5dB, 300KHz~3MHz
  • Triangle Wave
  • Linear : ≥ 98%, 0.3Hz~100KHz; ≥ 95%,100KHz~3MHz/5MHz
  • Square Wave
  • Symmetry : ± 2 %, 0.3Hz~100KHz / 1Hz~100KHz
  • Rise or Fall Time : ≤ 80nS at maximum output ( into 50 Ωload )
  • CMOS Output
  • Level : 4Vpp≥±1Vpp ~14.5Vpp ± 0.5Vpp adjustable
  • Rise or Fall Time : ≤ 120nS
  • TTL Output
  • Level : ≥ 3Vpp
  • Fan out : 20TTL load
  • Rise or Fall Time : ≤ 25nS
  • VCF
  • Input Voltage : 0V~10V ± 1V(100:1)
  • Input Impedance : 10K Ω± 10%
  • GCV
  • Output Voltage : To set the voltage between 0V~2V as per different frequency.
  • Sweep Operation
  • Sweep/Manual : Switch selector
  • Sweep/Rate : 100:1 ration max. and adjustable
  • Sweep/Time : 0.5S~30S adjustable
  • Sweep/Mode : Lin./Log. Switch selector
  • Amplitude Modulation
  • Depth : 0~100%
  • MOD. Freq. : 400Hz(INT);DC~1MHz(EXT)
  • Carrier BW : 100Hz~3MHz/5MHz (-3dB)
  • EXT Sensitivity : ≤ 10Vpp for 100 % modulation
  • Frequency Modulation
  • Deviation : 0~ ± 5%
  • MOD. Freq : 400Hz(INT) ; DC~20KHz(EXT)
  • EXT Sensitivity : ≤ 10Vpp for 10 % modulation
  • Frequency Counter
  • Int./Ext : Switch selector
  • Range : 0.3Hz~3MHz/5MHz (5Hz~100MHz EXT)
  • Accuracy : Time base accuracy ± 1count
  • ime base : ± 20ppm(23 ℃± 5 ℃ ) after 30minutes warm up
  • Resolution : The maximum resolution10nHz for 1Hz and 0.1Hz for 100MHz
  • Input Impedance : 1M Ω /150pF
  • Sensitivity : ≤ 35mVrms(5Hz~80MHz); ≤ 45mVrms(80MHz~100MHz)
  • General
  • Power Source : AC115V/,230V ± 10%, 50/60Hz
  • Operation Environment : Indoor use, altitude up to 2000m,
  • Ambient Temperature 0 ℃ ~40 ℃,
  • Relative Humidity 80% (Maximum),
  • Installation category Ⅱ,
  • Pollution Degree 2.
  • Storage temperature & Humidity : -10℃ ~70 ℃ ,70%(Maximum)
  • Accessories : Power code × 1pcs, Testing code × 1pcs, Instruction manual × 1pcs
  • Dimension: 251 ( W ) × 91(H) × 291(D)mm
  • Weight :2.2kgs for MFG-8219A, 2.5kgs for MFG-8255A
Feature
  • Frequency Range:0.3Hz~3MHz/0.5Hz~5MHz
  • Waveforms: Sine, Triangle, Square, Ramp, TTL and COMS Output
  • External Voltage Controlled Frequency(VCF) Function
  • Duty Cycle Control with Signal Inversion Capability
  • Variable DC offset Control
  • Two-Step(-20dB × 2) and Variable attenuator
  • Built-in 6 Digit Counter with INT/EXT Function up to 100MHz/high resolution
  • INT/EXT AM/FM modulation
  • LIN/LOG Sweep Mode
  • GCV Output for Synchronization

 

©2006 Matrix Technology Inc All rights reserved
Add: Building.B, No.5 East Wing, Shangxue Technology City, Bantian, Longgang, Shenzhen, China 518129
Tel: 0086 755 61217025 Fax: 0086 755 61217015