MCR-6000A SERIES LCR METER
•Basic measurement accuracy up to 0.05%, test frequency coverage: 12Hz-600kHz
•Can measure various parameters such as |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR
•Supports series/parallel equivalent circuits
•Output impedance supports four options: 30Ω, 50Ω, 100Ω, 10/CC
•Built-in comparator, supporting 11-level sorting
•Standard interfaces: RS232C, HANDLER, USB HOST, USB DEVICE, headphone jack, foot pedal interface
Want a custom configuration?
The MCR-6000A Series high-precision digital bridge is a multi-functional electronic component parameter tester with continuously adjustable frequency points from 12Hz to 600kHz and basic measurement accuracy of 0.05%, suitable for production line quality inspection, incoming inspection, and laboratory measurement. Equipped with a 32-bit processor and a 4.3-inch true-color TFT screen, it displays multiple parameters such as |Z|, Y, C, and L with 6-digit resolution, supporting direct reading, deviation values, and voltage/current monitoring. The output impedance has four options including 30Ω and 100Ω; the test level is 5mV-2V (normal) and 10mV-1V (constant level), with 0V, 1.5V, 2V DC bias. It supports 11-level sorting, 10-point list scanning, a maximum measurement speed of 75 times per second, and adjustable averaging times from 1 to 255. With built-in 100 groups of storage and USB expansion for 500 groups, it supports software upgrade. It comes with standard RS232C and USB interfaces, with optional GPIB, etc. Supporting language switching and password protection, a 15-minute warm-up after startup ensures accuracy to meet diverse testing needs.
| Test frequency | MCR-6100A：12Hz－100kHz，Minimum 0.0001Hz step
MCR-6200A：12Hz－200kHz，Minimum 0.0001Hz step MCR-6600A：12Hz－600kHz，Minimum 0.0001Hz step |
| parameter | | Z|, |Y|, C, L, X, B, R, G, D, Q, θ ,DCR |
| Basic accuracy | 0.01% , (0.1% for DCR test) |
| equivalent circuit | Series & parallel |
| Mathematics function | Absolute deviation, Percentage deviation |
| Range | Auto, Hold, Manual selection |
| Trigger mode | INT, MAN, EXT, BUS |
| Speed（≥1kHz） | FAST: 75 times/second,
MED: 12 times/second, SLOW: 3 times/second |
| Average | 1—255 |
| Delay Time | 0—60s |
| Calibration | open / short / load |
| Test terminal | Five terminal |
| List scan | 10 point list scanning function (4 point list for GF100A GF200LA GF200A) |
| Comparative function | eleven BIN sorting function（BIN1~BIN9,AUX,OUT）
six BIN sorting function（BIN1~BIN4,AUX,OUT）for GF100A GF200LA GF200A |
| Multi parameter test | Yes |
| Display mode | Direct，Δ，Δ%，V/I |
| Monitor | 480 x 272 RGB, 4.3 inch, 16: 9 LCD TFT display |
| Output impedance | 30 Ω, 100 Ω, 10 /100, 10 /CC |
| Test level | 5 mV－2V , Accuracy：10%
Constant level：10 mV－1 V Accuracy：5% |
| DC bias source | 0V，1.5V，2V，Accuracy：1% |
| Display range | |
| |Z|, R, X | 0.01mΩ — 99.9999 MΩ |
| DCR | 0.001 mΩ — 99.9999 MΩ |
| |Y|, G, B | 0.00001µS — 99.9999S |
| C | 0.00001pF — 9.99999F |
| L | 0.00001µH — 99.9999kH |
| D | 0.00001 — 9.99999 |
| Q | 0.00001 — 99999.9 |
| θ (DEG) | -179.999º — 179.999º |
| θ (RAD) | -3.14159 — 3.14159 |
| Others | |
| size | 265mm(W）*100mm（H）*340mm(L） |
| suttle | About 4.5 kg |
| Standard Accessories: | Power Cable*1PC, RS-232, USB DEVICE, USB HOST, User Manual |
|---|---|
| Optional Accessories (Manufacturer installed only): | Foot Switch Interface, GPIB, Headphone Jack |