Triple channel programmable DC power supply is with high resolution, high precision and high stability, Over-voltage and over-heat protection are available.Series and parallel operation are also provided .The resolution is 10mV /1 mA.

This series of products is a programmable DC switching power supply with high accuracy and single output. It is light and compact, adjustable in voltage and current, and has multiple operating modes.The whole system is completely controlled by the microprocessor (mpu), and can easily use the communication interface (rs-232) to connect with the computer (pc) to meet the user's requirements for automatic testing and automatic control. The software instructions are completely in accordance with the scpi command. The format makes it easy for users to develop automatic test and automatic control applications.Due to the full digitalization of the system, the data input is completely controlled by the keyboard and knob, which is fast, accurate and convenient.Can be widely used in electronic product development, device testing, communications industry, laboratories and scientific research institutions.

MPS-3600LP series is the high-quality programmable DC power supply of new generation, and this series of products can be equipped with communication interface. MPS-3600LP series power supply has the characteristics of both desktop type and system type, and can be freely matched with other instruments to integrate into the test system with special functions so as to meet measurement demands on different occasions, and the program can be edited through panel keyboard to bring great convenience to users. It is an alternative product of the ordinary programmable power supply, and has advantage of high cost performance.

MPS-3600H series is a new generation of high quality programmable DC power supply. This series of products is equipped with RS232 communication interface. The MPS-3600H series power supply has both desktop and system characteristics.

The MPS-200 series is a new high-precision programmable switching DC power supply, with a novel appearance, light weight, small size, simple operation, and great convenience for users. It has a high cost-effectiveness and comes standard with RS232, RS485, and USB communication interfaces. It can be widely used in electronic product development, component testing, communication industry, laboratories, research institutions, etc..

The WPS-300S series is a new high-precision and wide range programmable switching DC power supply. It has a novel appearance, light weight, small size, simple operation, and good stability, bringing great convenience to users. It has a high cost-effectiveness advantage and is equipped with RS232, RS485, and USB communication interfaces as standard. It can be widely used in electronic product development, component testing, communication industry, laboratories, and research institutions.

The PDS-E series is a new generation of high-quality adjustable regulated DC power supply, with a novel appearance, high power density, high efficiency, small size, simple operation, good stability, and great convenience for users. It has a high cost-effectiveness advantage

• High visibility vacuum fluorescent display (VFD)
• The voltage and current can be adjusted by using the digital keyboard or knob
• The digital step value can be adjusted with the cursor
• High accuracy and resolution
• It can be output according to the voltage and current value programmed
• Set the timing output time (0.1~99999.9 seconds)
• Low ripple and low noise
• Intelligent fan control, energy saving, noise reduction, remote compensation function, compensation of online voltage drop
• With rich SCPI instructions, it is convenient to build an intelligent test platform
• With voltage, overcurrent and over-temperature protection functions
• Support front and rear panel output
• Optional external analog control function

• Voltage, current and power are displayed in four digits at the same time, which is accurate and easy to use.
• Five groups of storage and memory functions are convenient to use.
• CH1/CH2 can be operated in series, parallel and independently.
• Independent switch control output for each channel
• Coding switch regulates voltage and current
• OVP/OCP setting
• Three channels can be turned on/off together

• Resolution of voltage 1mV and current 0.1mA, high precision display
• Set voltage and current in two ways: digital keyboard and knob
• Nine groups of voltage and current storage and call out function, convenient and fast
• Output switch control, easy control
• Intelligent temperature-controlled fan, extremely practical
• The knob adopts a coding switch, which is convenient and fast to use, and has the function of anti-misadjustment
• List output
• Voltage range setting
• Button sound off function

● Multi-interface display,file list,real-time list display, histogram display,real-timelrecord/analysis curve display,alarm list,system Settings,etc..
●Supports multiple sensor inputs:K J E TN S R B.
●Basic measurement accuracy:0.2° ℃+2 words(without sensor),cold end compensation accuracy: 0.5 ℃ .
●Each channel can be set to use different thermocouple types.
●Support a maximum of 64 recording files,each file 130,000 groups of data,1 to 9999seconds interval arbitrary setting, the maximum recording time =97 days x interval.
●USB and RS485 communication ports are standard.
● Using 8 different thermocouples at the same time.
●Modular design, each module 8 channels,support a maximum of 64 channels,Automatic identification of capacity expansion.

MPP series DC power has a maximum output voltage/current of 1000V/100A, a maximum power of 8KW , and a standard 2U/3U chassis for easy mounting. The product has high resolution and high precision,low rippleand low noise, high stability,high reliability and so on.

MPP series DC power has a maximum output voltage/current of 1000V/100A, a maximum power of 8KW , and a standard 2U/3U chassis for easy mounting. The product has high resolution and high precision,low rippleand low noise, high stability,high reliability and so on.

MPP series DC power has a maximum output voltage/current of 1000V/100A, a maximum power of 8KW , and a standard 2U/3U chassis for easy mounting. The product has high resolution and high precision,low rippleand low noise, high stability,high reliability and so on.

Test lead and test box

Essentially, an oscilloscope probe establishes a physical and electrical connection between a test point or source and an oscilloscope; in fact, an oscilloscope probe is a type of device or network that connects a signal source to an oscilloscope input, There are three key issues with the degree of connectivity: physical connectivity, impact on circuit operation, and signal transmission.