
l Signal source frequency range: DC, 10Hz ~ 5/10/20/30MHz
l Signal source grade: 10mV ~ 2V / 200μA ~ 20mA
l Basic accuracy up to ±0.08%
l ALC function
l Output resistance 25Ω/100Ω, switchable
l Wide resistance measurement range from 25 mΩ to 40 MΩ (measurement accuracy up to 10%)
l Parameters: |Z|, |Y|, θ, R, X, G, B, L, C, D, Q, DCR, ESR, Vac, Iac, Vdc, Idc, etc.
l Ultra-high measuring speed
l Open circuit/short circuit/load calibration function
l Electric meter mode, multistep list mode, scan & analyze mode
l Up to four component parameters can be selected in the electric meter mode. The induction and DCR values can be measured and displayed simultaneously
l Auto component classification: Comparator function and Handler BIN classification function
l Up to 32 sets of multistep list programs can be stored in the permanent memory and up to 16 test steps can be arranged in each program
l Rapid automation and data access function is realizable for USB, LAN, GPIB and RS232 interfaces
l PC connection data analysis software is available optionally
l 7" 800*480 TFT LCD color screen
l Ultra-light design: 344x145x343mm, 3kg
l Ultra-low power consumption (<30W) without fans and zero noise
9030 Precision Impedance Analyzer |
|||||||
Models |
Frequency range |
Meter mode |
List mode |
Sweep mode |
Equivalent circuit analysis |
||
MCR-9030 |
10Hz~ 30MHz |
√ |
√ |
√ |
|
||
MCR-9020 |
10Hz~ 20MHz |
√ |
√ |
√ |
|
||
MCR-9010 |
10Hz~ 10MHz |
√ |
√ |
√ |
|
||
MCR-9005 |
10Hz~ 5MHz |
√ |
√ |
√ |
|
||
|
|||||||
Resolution |
100mHz, 6-bit Frequency Input |
||||||
Accuracy |
7 ppm±100mHz |
||||||
Basic Accuracy |
±0.08% |
||||||
Display Range |
DCR |
0.00mΩto99.9999MΩ |
|||||
lZl |
0.000mΩto9999.99MΩ |
||||||
R,X |
±0.000mΩto9999.99MΩ |
||||||
lYl |
0.00000μSto999.999kS |
||||||
G, B |
±0.00000μSto999.999kS |
||||||
Cs, Cp |
±0.00000pFto9999.99F |
||||||
Ls, Lp |
±0.00nHto9999.99kH |
||||||
Q |
0.00to9999.99 |
||||||
D |
0.00000to9999.99 |
||||||
θDEG |
±0.000°to180.000° |
||||||
θRAD |
±0.00000 to 3.14159 |
||||||
Δ% |
±0.000%to999.999% |
|
Range |
10mV~2Vrms |
||
|
Resolution |
1mV |
||
Voltage Signal Level |
Accuracy |
|
||
|
4-Terminal test fixture |
± [(10 + 0.05 × f )% + 1 mV] |
||
*f : frequency [MHz] |
Cable length > 0m |
± [(15 + 0.1 × f )% + 1 mV] |
||
|
Range |
200µA~ 20mArms |
||
|
Resolution |
10µA |
||
|
Accuracy |
|
||
|
4-Terminal test fixture |
|
||
Current Signal Level |
at ≦ 15MHz |
+[10% + 50 μA], –[(10 + 0.2 × f 2 )% + 50 μA] |
||
|
at > 15MHz |
± [(10 + 0.3 × f )% + 50 μA] |
||
|
Cable length > 0m |
|
||
|
at ≦ 5MHz |
+[10% + 50 μA], –[(15 + 1.5 × f 2 )% + 50 μA] |
||
*f : frequency [MHz] |
at > 15MHz |
± [(20 + 0.3 × f )% + 50 μA] |
||
Measurement Time |
<3ms(The fastest) |
|||
Output Resistance |
25Ω/100Ω, switchable |
|||
Parameter |
|Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、Vdc-Idc、ESR、ε、µ |
|||
Calibration |
Open Circuit/ Short Circuit/Load Calibration |
|||
Measurement Circuit |
Series/Parallel |
|||
Multi-steps Mode |
50 setup groups (with each group containing 15 measuring steps) |
|||
PCLINK CPK Equivalent Circuit Analysis |
Option |
|||
Flash Memory |
100 LCR-measure Mode setup documents& 50 Multi-steps Mode setup documents |
|||
USB Memory |
LCR-measure Mode setup document、Multi-steps Mode setup document、BMP graphics、Test result data、Sweep Mode BMP graphics& result data |
|||
Interface |
I/O Interface |
Handler |
||
USB、RS232 |
Parallel interface |
|||
Serial interface |
GPIB |
|||
Display |
7.0”TFT, 800*480color screen |
|||
Environment |
10°C~40°C,≤80%RH |
|||
Power Supply |
Voltage |
90~264Vac |
||
Frequency |
47~63Hz |
|||
Power Consumption |
Low power consumption: Maximum 30W (Nominal value) |
|||
Dimension(W*H*D) |
336x147x340mm |
|||
Weight |
3kg |