Contact Form Demo (#4)

MOS-620 Dual Channel Analog Oscilloscope

MOS-620 series dual trace oscilloscope, the maximum sensitivity is 5mV/div, the maximum scanning speed is 0.2us/div, and can be expanded 10 times to make the scanning speed reach 20ns/div. The oscilloscope adopts a rectangular CRT with a scale of 6 inches, which is easy to operate, stable and reliable.

SKU: 4-1 分类:
Want a custom configuration?
分享你的喜爱
  • Dual channel 20MHz;
  • Japanese electronic code switch, light and reliable;
  • Sweep X10 times;
  • Sealed attenuation switch is durable;
  • TV synchronization, X-Y mode;
    ●ALT trigger function, can measure two irelevant signals;
  • High luminance,interal calibrated CRT.
Model MOS-620
Vertical system Trigger
Sweep time:0.2μSec~0.5Sec/DIV ,20 steps in 1-2-5 sequence Trigger source:CH1,CH2,LINE,EXT
Accuracy:±3% Trigger Coupling:AC:20Hz to full bandwidth
Fine:≤1/2/5 panel indication scale Trigger slope:+/-
Sweeping magnification: 10 times Sensitivity:20Hz~2MHz:1DIV TRIG-ALT:2DIV EXT:200mV
X10MAG sweep time accuracy:   ±5%(20nSec~50nSec not calibrated) 2MHz~20MHz:1.5DIV TRIG-ALT:3DIV EXT:800mV
Linear:±5%X10MAG:±10%(0.2s~1μs) TV: Sync pulse>1DIV(EXT:1V)
Displacement caused by X10MAG: < 2DIV at the center of CRT Trigger mode:AUTD: AUTO     NORM:NORM
X-Y mode TV field: when you want to observe a TV signal;
Sensitivity: same as vertical axis TV line: (only when the sync signal is negative pulse, the TV field and TV line can be synchronized)
Frequency range:DC~500kHz External trigger mode model
X-Y phase error:≤3°(DC~50kHz) Input impedance: Approx. 1MΩ/25pF
Horizontal system Max. Input voltage:300V(DC+AC peak) AC frequency:  1kHz or lower
Sensitivity:5mV~5V/DIV, 10 steps in 1-2-5 sequence Calibration signal
Sensitivity and accuracy:≤3%;1/2.5 or smaller than the panel indicating scale Waveform:Square wave
Frequency range:DC~20MHz Freq.:Approx.1kHz
AC coupling:<10Hz (100kHz 8DIV frequency response:-3dB) Duty cycle:<48:52
Rise time: Approx. 17.5nS Output voltage:2Vp-p±2%
Input resistance:Approx. 1M/25pF Output impedance: Approx.1kΩ
DC balance movement:5mV~5VDIV:±0.5DIV CRT oscilloscope tube
Linear: When the waveform moves vertically in the center of the grid(2DIV) Model : 6 inch rectangular internal graticule
Amplitude change<±0.1DIV Phosphor powder specifications:P31
Vertical mode CH1;CH2; DUAL: CH1 and CH2 display simultaneously Speed can be selected alternately or intermittently Acceleration voltage:Approx. 2kV(20MHz)
ADD:CH1 and CH2 do algebraic addition Valid display:8X10DIV [ 1DIV=10mm(0.39in) ]
Intermittent repetition frequency:Approx. 250kHZ Graticule:internal
Input coupling:AC  GND  DC Trace rotation: adjustable at front panel
Maximum input voltage:300V peak  (AC : Freq.≤1kHz) Technical characteristic
Common mode rejection ratio: >50:1 at 50kHz sine wave (Set the sensitivity of CH1 and CH2 the same) Power source:AC 220C±10%(standard),AC 110V/220V
Insulation between 2 channels (in the range of 5mV/DIV): ±10%(optional)   50Hz/60Hz, 35VA Maximum
>1000:1   50kHz;    >30:1   15MHz /  >30:1  35MHz;>30:1 45MHz Dimension:455(W)*150(H)*310(D)mm
CH2  INV  BAL: Balance point change rate ≤ 1DIV (corresponding to the scale center) Weight:Approx. 8kg
Contact Form Demo (#4)

High Quality

Fast Delivery

Best Warranty