MDS-2000 Series Digital Storage Oscilloscope
•Dual-channel with 150MHz/250MHz bandwidth
•Real-time sampling rate: 1GS/s
•Input coupling supports DC, AC, Ground; input impedance: 1MΩ±2%
•Trigger types include edge trigger and video trigger
•Trigger modes: auto, normal, single
•Can store 16 waveforms
Want a custom configuration?
The MDS-2000 Series Digital Storage Oscilloscope is a high-performance detection tool, meeting professional testing needs with excellent signal capture capability and rich functions. It includes two models: MDS-2152 (150MHz bandwidth) and MDS-2252 (250MHz bandwidth), both equipped with 2 channels and a real-time sampling rate of 1GS/s, paired with a 10K record length, enabling accurate capture of transient signal details. The 7-inch 65536-color TFT LCD screen displays clearly, supporting synchronous presentation of waveforms, parameters, and analysis results, with intuitive and efficient operation.
This series of oscilloscopes has brilliant features: it supports edge triggering, video triggering, and alternate triggering, enabling stable capture of asynchronous signals; it has functions such as mathematical operations, automatic measurement, and cursor measurement, facilitating in-depth analysis of signal characteristics. It has built-in 16 groups of waveform storage, with standard USB Host/Device interfaces, supporting data export and PC connection, and compatible with SCPI commands and LabVIEW for adaptation to automated test systems. With a body size of only 301×152×70mm and a weight of approximately 1.1kg, it balances portability and professionalism, suitable for electronic R&D, circuit detection, and other scenarios.
| Model | MDS-2152 | MDS-2252 |
| Bandwidth | Up to 150MHz | Up to 250MHz |
| Sample Rate | 1GS/s | |
| Horizontal Scale (s/div) | 2ns/div – 1000s/div, step by 1 – 2 – 5 | |
| Rise Time (at input, typical) | ≤3.5ns | ≤1.7ns |
| Channel | 2 | |
| Display | 7” color LCD, 800 x 480 pixels | |
| Input Impedance | 1MΩ ± 2%, in parallel with 20pF±5pF | |
| Channel Isolation | 50Hz: 100 : 1, 10MHz: 40 : 1 | |
| Max Input Voltage | 400V (PK – PK) (DC+AC, PK – PK) | |
| DC Gain Accuracy | ±3% | |
| Record Length | 10K | |
| DC Accuracy (average) | Average:≥16： ±(3% reading + 0.05 div) for ΔV | |
| Probe Attenuation Factor | 1X, 10X, 100X, 1000X LF Respond (AC, -3dB) | |
| LF Respond (AC, -3dB) | ≥10Hz (at input, AC coupling, -3dB) | |
| Sample Rate / Relay Time Accuracy | ≤100ppm | |
| Interpolation | sin(x) / x | |
| Interval (ΔT) Accuracy | Single: ±1 interval time + 100ppm x reading + 0.6ns, Average:16 : 1 interval time + 100ppm x reading + 0.4ns | |
| Input Coupling | DC, AC, and GND | |
| Vertical Resolution (A/D) | 8 bits (2 channels simultaneously) | |
| Vertical Sensitivity | 5mV/div – 5V/div (at input) | |
| Trigger Type | Edge, Video | |
| Trigger Mode | Auto, Normal, and Single | |
| Trigger Level | ±5 divisions from screen center | |
| Line / Field Frequency (video) | NTSC, PAL and SECAM standard | |
| Cursor Measurement | ΔV and ΔT between cursors | |
| Automatic Measurement | Vpp, Vavg, Vrms, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre – shoot, Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A – B, Delay A – B, area, cycle area | |
| Waveform Math | +, -, ×, ÷, invert, FFT | |
| Waveform Storage | 16 waveforms | |
| Lissajous | Full bandwidth | |
| Figure | ±3 degrees | |
| Communication Interface | USB host, USB device | |
| Frequency Counter | available | |
| Power Supply | 100V – 240V AC, 50/60Hz, CAT II | |
| Power Consumption | <15W | |
| Fuse | 2A, T class, 250V | |
| Dimension (W x H x D) | 301 x 152 x 70 mm | |
| Device Weight | 1.10 kg | |
| Standard Accessories: | Power Cable*1PC, Probe, Probe Adjuster, USB Cable, User Manual |
|---|