Product Center
Categories
Max. Power Range
DC Voltage Range
DC CURRENT RANGE
Voltage/Current
Showing 1–16 of 72 results
-
AC Power Source APS-4000 Series
•Output capacity: 350VA~1200VA; Output voltage: 0~150VAC/0~300VAC; Maximum current up to 10A
•Output frequency: 45~250Hz continuously adjustable, with adjustment accuracy of 0.01Hz/step
•Measurement items: Vrms, Arms, Fre, Wattage, PF
•Four-window 5-digit display, synchronously showing voltage, current, frequency, power/power factor
•Equipped with setting shortcuts for 110V, 220V, 50Hz, 60Hz -
AC Power Source APS-7000 Series
•Output capacity: 500VA~3000VA; Output voltage: 0~155VAC/0~310VAC; Maximum current up to 25A
•Output frequency: 45~500Hz, expandable to 999.9Hz
•Measurement items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
•Can simulate power grids for inverter output characteristic testing, including synchronous phase and frequency
•With arbitrary waveform function
•Can artificially apply voltage surges or sags to the tested device’s output -
APS-50000 SERIES AC POWER SOURCE
•Output capacity: 5kVA~500kVA; Output voltage: 0~150VAC/151~300VAC
•Output frequency: 40~250Hz continuously adjustable, with adjustment accuracy of 0.01Hz/step
•Input supports wide-range voltage: 1Φ2W 220V±15% or 3Φ4W 380V±15%
•Measurement items: Vrms, Arms, Fre, Wattage, PF
•Adopts SPWM (Sinusoidal Pulse Width Modulation) technology
•Overload capacity: Instantaneous current can withstand 3 times the rated current -
APS-6000 Series AC Power Source
•Output voltage AC 0-300v adjustable and power 1000VA
•A/P/PF upper and lower limit Settings, with voice alarm function
•The four Windows display V, A, P, Apk/PF/F switching
•Easy to use, safe and reliable -
APS-8000 Series Programmable Variable-Frequency Power Supply
•Single phase output 500VA-5kVA: Customization is supported for specifications above 5KVA
•Adjustable voltage and frequency in output state: can also be pre-set and called
•Equipped with power-off memory function, automatically remembering the last output parameters
•Can be set to store 30 sets of programming parameters and9999 cycles of testing
•Strong impact resistance, can easily drive motors, compre- sors, and other equivalent power impact loads -
Digital Multimeter MDM-200 Series
The MDM-200series of instruments can measure parameters including; AC/DC voltage, DC current, resistance, diodes, carry out on-off tests, zero-line judgement, non-contact voltage detection and the true effective value of AC. It is a tool with excellent performance; the ideal tool for laboratories, factories, radio enthusiasts and when carrying out home improvements.
-
High Power Meter MPM-1010 1010B
•Six major test parameters: V/A/P/PF/F/Apk
•Four windows for simultaneous display
•Wider frequency response: 15Hz-650Hz
•Adopts direct wiring method
•Can test no-load power consumption
•Upper and lower limit settings for power factor, current, and power, with sound and light alarms -
MCR-5000 Series Digital LCR Meter
•Wide test frequency range: 40Hz~200kHz
•Can measure various parameters such as L, C, R, Z, D, Q
•Two different signal source output impedances: 300Ω, 100Ω
•Built-in comparator, 5-level sorting with flexible pass/fail alarm modes
•With open/short/quick zero calibration functions to ensure measurement accuracy -
MCR-6000A SERIES LCR METER
•Basic measurement accuracy up to 0.05%, test frequency coverage: 12Hz-600kHz
•Can measure various parameters such as |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR
•Supports series/parallel equivalent circuits
•Output impedance supports four options: 30Ω, 50Ω, 100Ω, 10/CC
•Built-in comparator, supporting 11-level sorting
•Standard interfaces: RS232C, HANDLER, USB HOST, USB DEVICE, headphone jack, foot pedal interface -
MCR-8000H SERIES LCR METER
•Basic measurement accuracy up to 0.05% (0.1% for DCR testing), test frequency coverage: 20Hz-5MHz
•Can measure various parameters such as |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR
•Supports series/parallel equivalent circuits
•Output impedance supports 30Ω, 100Ω, 10/100, 10/CC
•Built-in DC bias: -5V~+5V (-100mA~+100mA)
•Graphic scanning analysis function, supporting frequency/level/bias scanning to insight into the characteristics of the tested device -
MCR-9000 Series High-Frequency LCR Meter
•Test frequency coverage: 10Hz-30MHz
•Minimum frequency resolution: 100mHz, 6-digit frequency input
•Can measure various parameters such as |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR, Vdc-Idc, ESR, μr, εr
•Test signal voltage range: 10mV-2Vrms; current range: 200μA-20mA
•Output impedance: 25Ω/100Ω switchable, with automatic level control (ALC) function -
MDM-5500 Series Digital multimeter
•5½ digital display: Maximum reading up to 55,000
•Equipped with three measurement rates: low, medium, and high
•Covers multiple measurement functions including DCV, ACV, DCI, ACI, resistance, frequency, period, diode, continuity, temperature, and capacitance
•Dual display function
•Data recording function -
MDM-8200 Series High-Precision Digital Multimeter
•6½ digital display readings
•4.3-inch 64K color TFT LCD screen
•Multiple display forms
•Dual display measurement function
•0.1uV high resolution
•Various measurement functions -
MDS-2000 Series Digital Storage Oscilloscope
•Dual-channel with 150MHz/250MHz bandwidth
•Real-time sampling rate: 1GS/s
•Input coupling supports DC, AC, Ground; input impedance: 1MΩ±2%
•Trigger types include edge trigger and video trigger
•Trigger modes: auto, normal, single
•Can store 16 waveforms -
MEL-9000 Series Programmable DC Electronic Load
•High-resolution measurement: current 0.001A, voltage 0.001V, resistance 0.001Ω, power 0.001W
•Input voltage: AC 220V±10%, 50/60Hz
•Power consumption: <40W
•Load resistance range: 0.1Ω~1000kΩ
•Multiple communication interfaces support automated testing systems
•Intelligent temperature control ensures stable operation under full load conditions -
MFG-1000 series dual channel function/arbitrary waveform generator
- Adopting a 2.4 inch 320x240TFT LCD screen with a clear graphical interface;
- Support for Chinese and English menus;
- Dual channels are independent of each other and have phase synchronization function;
- 200MSa/S sampling rate, 13 bit vertical resolution, 8k storage depth;
- Built in 5 basic waveforms and 32 arbitrary waveforms;
- Waveform storage; Support internal storage of 50 sets of user-defined edited waveforms;
- Pulse wave output with adjustable edge time;
- Internal AM, FM, and PM modulation functions (optional for external AM, FM, and PM modulation);
- Internal/external ASK, FSK, PSK modulation functions;
- Dual channel output, with a maximum output frequency of 60M;
- Output of linear/logarithmic sweep and burst (pulse train) waveforms;
- Equipped with a 100MHz high-precision frequency meter and 32-bit counter;
- Standard USB Device interface; Optional external analog modulation interface;
- Equipped with multi-functional arbitrary waveform editing software.
